Matt

>Matt Organiscak

About Matt Organiscak

This author has not yet filled in any details.
So far Matt Organiscak has created 13 blog entries.

3D Printing in the Oil and Gas Industry

By | 2018-08-09T03:06:39+00:00 May 5th, 2018|Articles|

    In recent years, much of the focus of news related to 3D printing has been on the technology’s use within a factory setting, lab, classroom or shop.  Each industry exploring 3D printing starts with a learning curve to incorporate the technology for practical use within that industry. As the learning curve develops those [...]

Comments Off on 3D Printing in the Oil and Gas Industry

Shaping the Future – 3D Printed Tooling for Thermoforming

By | 2018-08-21T23:18:26+00:00 March 20th, 2018|Articles|

Many of the processes used to produce the thousands of day to day products we consume are shrouded in mystery for the average consumer.  Often, the packaging itself is a vital part of the marketing of a product.  And while most people have at times harbored thoughts of revenge and fury at packaging clamped [...]

Comments Off on Shaping the Future – 3D Printed Tooling for Thermoforming

Owens Corning Brings Filament Performance to the Forefront

By | 2018-07-25T10:35:38+00:00 March 20th, 2018|Articles|

Leaps in technology and performance of 3D printers have dominated headlines for many years.  It seems each week brings new machines, new equipment capabilities, better resolutions and higher performance and speed.  Materials for 3D printers however, have often been overlooked by tech media, viewed as “less glamorous” and more utilitarian than the printers themselves.  [...]

Comments Off on Owens Corning Brings Filament Performance to the Forefront

3D Printing for Jigs and Fixtures – Circling the Funnel

By | 2018-07-25T10:51:03+00:00 January 19th, 2018|Articles|

   As 3D technology continues to advance, many of the benefits are becoming more integrated within manufacturing. One of the obvious and early applications of 3D technology within the highly competitive manufacturing world has been the growth of rapid prototyping. Previously, companies could take weeks, months and even years to perform all the R&D required [...]

Comments Off on 3D Printing for Jigs and Fixtures – Circling the Funnel

Additive Manufactured (3D Printed) Tooling Comes of Age

By | 2018-08-07T09:22:54+00:00 January 12th, 2017|Articles|

A Tooling Case Study      A few years ago, a small but rapidly growing US startup faced a problem.  Initial product lines had been successful and the market was hot.  The owner had bootstrapped the startup and pulled together the resources to produce an improved machine.  Speed, quality and performance would be greatly enhanced and [...]

Comments Off on Additive Manufactured (3D Printed) Tooling Comes of Age

How to Level a Typical Cantilevered-Style Build Plate

By | 2018-08-07T09:12:45+00:00 July 28th, 2016|Articles|

 Hey everyone. This is Matt from IC3D and I am going to show you how to level your build plate on an older style makerbot platform. With the FDM 3D printing process it is very important that your build plate is nice and level for each print.  In addition, we want to make sure [...]

Comments Off on How to Level a Typical Cantilevered-Style Build Plate

How to Apply Kapton Tape to a Glass Build Plate

By | 2018-08-07T09:24:59+00:00 July 27th, 2016|Articles|

https://www.youtube.com/watch?v=BEFFHMJXEFg Hey everyone. This is Matt from IC3D and I am going to show you a quick and easy way to apply kapton tape to any build plate for an FDM style 3D Printer. For this method, we will need a spray bottle of water, a squeegee with a rubber edge, scissors, and your [...]

Comments Off on How to Apply Kapton Tape to a Glass Build Plate

Fused Deposition Modeling (FDM) and Its Main Limitations

By | 2018-08-07T09:15:58+00:00 July 27th, 2016|Articles|

Over the last quarter of a century 3D printing has developed from an experimental technology into a mainstream manufacturing technique. Some of you might already have a desktop 3D printer in your office or at home. Many others will have seen a 3D printer operating, or have read about the development of this industry. An [...]

Comments Off on Fused Deposition Modeling (FDM) and Its Main Limitations

How 3D Printing Can Improve Your Thanksgiving Holiday

By | 2018-08-07T09:24:32+00:00 July 27th, 2016|Articles|

Here a few ideas from pinshape.com and thingiverse.com to help shake up the holidays and maybe even solve a few common Thanksgiving conundrums. Start a new Thanksgiving tradition Not every American family lounges around Thanksgiving day watching football between naps. For those that like to do things a little differently, a 3D printed animal themed [...]

Comments Off on How 3D Printing Can Improve Your Thanksgiving Holiday

IC3D Maker Spotlight: Corban McIntosh – Student, 3D Printing Entrepreneur

By | 2018-08-07T09:12:56+00:00 July 27th, 2016|Articles|

We first met Corban McIntosh when he contacted us to ask about our black filament. “Hi, I'm trying to buy 3mm black PLA 2 lb spool, but every brand is out of stock. You guys are my favorite brand.” After responding to his query, we learned that Corban is more than a tinkerer and 3D [...]

Comments Off on IC3D Maker Spotlight: Corban McIntosh – Student, 3D Printing Entrepreneur
Load More Posts