IC3D ABS 3D Printer Filament

>>>IC3D ABS 3D Printer Filament
3D printing filament free shipping

IC3D ABS 3D Printer Filament


Rated 4.86 out of 5 based on 7 customer ratings
(7 customer reviews)
SKU: N/A Category:


ABS 3D printer filament

Printing Difficulty Level: Intermediate

  • Filament diameter is 1.75mm or 2.85mm +/-0.05, ovality (roundness) is within 4%

  • Printing temperature range is 220 – 260C

  • Bed temperature ~110C

  • Printer requirements: heated bed, all-metal hotend, heated enclosure recommended

  • Compatible with nearly all FFF (Fused Filament Fabrication) 3D printers that accept open filament

  • Filament Spool Dimensions

ABS has a reputation as an industrial standard for consumer plastic parts due to its high impact resistance and other good mechanical properties. IC3D engineers prefer it for the ease of support removal. We use it for a wide variety of print jobs from end-use automotive parts to netshape or near-netshape industrial parts.

Spend more time printing with high-quality 3D printer filament from IC3D. IC3D extrudes 3D printer filament in-house in Ohio, USA. Strict production standards for cleanliness and tolerance specifications ensure the diameter is within +/- 0.05mm and ovality (roundness) is within 4%. Quality is the top priority as each spool is hand checked, and packaged with desiccant. IC3D filament is extensively tested with success on a variety of mainstream desktop 3D printers utilizing various extruder designs and hot-end styles. The filament is also put through its paces in our own 3D printing service bureau.  Every spool of IC3D® filament is backed by a 100% SATISFACTION GUARANTEE. View IC3D Spool Dimensions.


Additional information

Weight N/A

1.75mm, 3mm


1kg (2.2 lbs), 2.5kg (5.5lb), 10kg (22 lbs)


Black, Blue, Green, Grey, Natural, Orange, Red, White, Yellow, No Preference

7 reviews for IC3D ABS 3D Printer Filament

  1. Rated 5 out of 5

    Paul Nanna

    On my third spool of 3mm ABS product and have had no difficulties using a 3 year old TAZ5 printer.
    Currently printing custom camera mounts to install into a tractor trailer rig to assist in an autonomous driving system for R&D.
    The filament is consistent and not prone to cracks or curl off the bed even through varying infill and temperature conditions.
    After trying various suppliers for a good ABS, this is the brand that does the best job so far.

  2. Rated 5 out of 5


    I will NEVER buy any other filiment. I had no idea the difference quality filiment made! DO NOT BUY ANY OTHER FILIMENT, THIS IS THE BEST!!

  3. Rated 5 out of 5


    This has by far been the highest quality filament that I have used. The options for larger quantities and the made in the USA factor are an additional plus. I can not recommend this filament enough.

  4. Rated 5 out of 5

    Joseph Conlin

    I have to agree with the previous two reviews. This has been the best performing filament we’ve used.
    Recently tried another brand’s ABS filament, and the parts would not stick to the bed. Wasted so much time and material. We ended up returning that and switched back to IC3D. Same exact gcode and the parts turned out perfectly. The quality really does make a difference!

  5. Rated 5 out of 5


    I’ve gone through spools and spools of this on my Taz 5. It’s perfect!

  6. Rated 4 out of 5


    I love all of IC3D ABS filament EXCEPT WHITE. the warping and layer adhesion is rough with white for whatever reason. I print with a Lulzbot Workhorse and use an enclosure. The temps that have worked best for my setup have been a heated build plate at 105C and the nozzle between 250-260C.

  7. Rated 5 out of 5

    Shad Moir

    I love the abs filament from IC3D more than any other company. Not only that, when I received a couple reels of bad filament, I was put in contact with a very qualified employee of the company who made sure I was sent new reels to test. This company cares about their customers, and I could not be more satisfied with my experience working with them. I will only buy from IC3D.

    When I print, I am using a Lulzbot Taz Workhorse with an enclosure.
    My best prints have been with the bed temperature at 105C and the nozzle temperature between 250-260C.
    Glue stick for build plate adhesion and easy part removal.

Add a review

Your email address will not be published. Required fields are marked *